Time |
Title |
Author/ Presenter |
Affiliation |
7:00 - 8:00 AM |
Breakfast |
SESSION 4: CFD of mixing processes
Chairs: O. Akiti
and J. Spinti |
8:00 AM |
PLENARY:
A Mix of Computational
Techniques for a Better Blend |
Francois Bertrand |
Chem. Eng., Ecole Polytechnique de Montreal |
8:45
AM |
Blending of Liquids with
Density Differences |
Jos
Dersken |
Chem. & Materials Eng. University of Alberta |
9:10 AM |
Stochastic Simulation of
Crystal Particle Attrition Based on the Statistic of the
Lagrangian Particle Simulation in a Stirred Vessel |
Ryuta Misumi |
Material Sci & Chem. Eng., Yokohama University, Japan |
9:35 AM |
Simulation of an Opposed
Jet, Process Flow Geometry and its Experimental Verification |
Robert S. Brodkey |
Chem & Biomolec. Eng., Ohio State University |
10:00 AM |
Break |
10:20 AM |
An Investigation of
Numerical and Modeling Issues Regarding CFD Predictions of
Velocity in a Stirred Tank with the RANS k-w Turbulence Model |
Peter Farber |
IMH
- Institute of Modeling and High performance computing,
Hoschshule Niederrherim, Germany |
10:45
AM |
Direct Numerical Simulations and Large Eddy Simulations of the
Turbulent Flow in a Baffled Tank Driven by a Rushton Turbine |
Harry
van den Akker |
University of Technology - Delft |
11:10 AM |
Ongoing Studies of the
Flow in Annular Centrifugal Contactors |
Kent E. Wardle |
Chem Sci & Eng. Division, Argonne National Laboratory |
11:35 AM |
Computational Fluid
Dynamics Simulation of a Quadrupole Magnetic Sorter Flow
Channel |
Thomas R. Hanley |
Chem Eng., Auburn University |
12:00 - 1:00 PM |
Lunch |
|
5:00 - 5:40 PM |
Social Hour and Exhibit |
5:40 - 7:00 PM |
Dinner |
|
SESSION 5: Experimental methods
Chairs: G. Padron
and
G.
Zhou |
7:00 PM |
The use of Physical
Modelling to Investigate Complex Industrial Mixing Problems |
Darwin Kiel |
Coanda Research & Development |
7:25 PM |
Mixer Performance Characteristics: Impeller and Process
Efficiency |
David A.R. Brown |
BHR
Group |
7:50 PM |
The Effect of Process
Variables on Blend Time
in a Continuous Stirred Tank |
Joelle Aubin |
Laboratory of Chemical Engineering - University of Toulouse |
8:15 PM |
Break |
|
|
8:35 PM |
Comparison Between
Electrical Resistance Tomography, CFD and Other Measurement
Techniques for Gas-Liquid Mixing |
Jonathan Ritson |
Industrial Tomography Systems |
9:00
PM |
Understanding Multiphase
Dispersions Occurring
in Bioprocesses |
Enrique Galindo |
Universidad Nacional Autonoma de Mexico |
9:25 PM |
Suspension of Slurries with Solids of Mixed Densities |
Arthur W.
Etchells |
Etchells & Rowan
University, NJ. |
9:50 - 11:30 PM |
Social Hour and Exhibit |